1976 bird carburetor replacement

[Richard 76]

Any input or suggestions for carbs for the 1976 460

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 

[OneAmongOthers]

Any input or suggestions for carbs for the 1976 460

I went with a holley 750 for my Tbird. It too has a 460 in it, but how much emission stuff do you still have connected?

 

[Richard 76]

I went with a holley 750 for my Tbird. It too has a 460 in it, but how much emission stuff do you still have connected?

My car is 100% complete and original 22,400 miles. I like all is there but not opposed to a little clean up of "unnecessary parts"

 

[Richard 76]

Also what model holley did you use and was it direct fit or did you use adapter

 

[73BigBird]

Any input or suggestions for carbs for the 1976 460

Decided after trying to rebuild the original (three times). Went with an Edelbrock aftermarket mounted on a composite riser (to keep the heat from that big 460 down to a minimum). Never have a problem starting and runs very well now!

 

[OneAmongOthers]

Also what model holley did you use and was it direct fit or did you use adapter

https://www.amazon.com/Holley-0-804...rds=0-80459SA&qid=1568043473&s=gateway&sr=8-1
I went with this carburetor and this intake
https://www.amazon.com/dp/B000CSWL0C/?tag=thunderbirdforum-20
However all the emissions on my 460 (was a late 70's engine) have been removed and capped. I would say for your 460 you would need the adapter plate for the EGR and emissions stuff unless you plan on removing the emissions.