2002 gauge cluster removal | Ford Thunderbird forum club group 1955-2005 models
  • We're glad you found us via a search engine! Right now, you can join our club absolutely free and unlock member only features like the site search! This notice only appears once! It only takes 30 seconds to register, and we would love to have you as part of the World's largest Thunderbird Forum/Club! Click here to continue

  • Click here to remove google ads from the site
  • Click " Like/Thanks" at the bottom of a member's post to reward and thank them for their response! Points are added to their profile.
  • 2002-05 Owners. As of August 2022 there is now an entire suspension kit for sale! Scroll down to the bottom of the first post click here.

  • Get rid of swirls and minor paint surface scratches with this Polish & Compounds kit. Click here to read more!.

2002 gauge cluster removal

  • Thread starter Thread starter mrcliental
  • Start date Start date
1. Tilt the steering column to the lowest position and telescope (extend) the steering column to the farthest position.
2. Remove the instrument panel cluster finish panel.
3. Disconnect the battery ground cable.
4. Remove the screws and remove the steering column covers.

1.jpg
5. Remove the bolts and remove the hood latch release handle.

2.jpg
6. Remove the pin-type retainers and remove the instrument panel steering column cover.

3.jpg
7. Remove the screw and remove the floor heat duct.

4.jpg

8. Remove the bolts and remove the steering column reinforcement.

5.jpg

9. Loosen, but do not remove, the steering column nuts.

6.jpg

10. Remove the screws and remove the instrument cluster.
11. Disconnect the electrical connectors.

To avoid damaging the instrument cluster lens, place a protective cloth over the upper steering column before removing the instrument cluster.

doug7740
1955 Thunderbird Blue
7.jpg
 
gauge cluster removal sequence advice please ?

good morning, seeking guidance on sequence of dash gauge removal ?.. Thanks !
 
Back
Top