Plastic Fasteners 2002 T Bird

[350xfire]

I was wondering if anyone knows what type of fastener is used on the 2002 engine cover, specifically the lower left fastener. There is a stud in that location that something screws into.

Also, on the front black plastic cover that is right behind the bumper, there are the plastic fasteners that screw up and then pull out. I am missing a couple I need to replace.

If anyone can tell me what these are and where I might be able to get them I would appreciate it,

Thanks

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 

[CodiakCB]

I got mine off Amazon at:

10 Ford Radiator Sight Shield Push-Type Retainers



by Clipsandfasteners Inc



Hope that helps!

 

[350xfire]

Here is yet another fastener question. Was wondering if you guys could point me to the correct plastic fastener type for the fender liners? These have the pull out tab that looks like a "blade" type. I searched Amazon but could not find the correct type. I would like to stay with the factory style ones.
Thanks

 

[Teufelei]

Really appreciate it guys! Took your recommendations and found what I needed.

I need 2 of the engine cover fasteners for a 2002 Thunderbird myself.... Where did you find what you wanted

 

[350xfire]

Radiator cover fasteners- front of engine bay : https://www.amazon.com/gp/product/B07TMF7D6B/?tag=thunderbirdforum-20

Engine cover- read post #2

 

[Zorro]

I was wondering if anyone knows what type of fastener is used on the 2002 engine cover, specifically the lower left fastener. There is a stud in that location that something screws into.

Also, on the front black plastic cover that is right behind the bumper, there are the plastic fasteners that screw up and then pull out. I am missing a couple I need to replace.

If anyone can tell me what these are and where I might be able to get them I would appreciate it,

Thanks

350xfire--did you find your fasteners? I have some extras; some of the radiator "X" ones and some of the "Black dot middle" ones too. The lower left cover stud is covered by a push-down that stays on the cover. It has no marking on the top--just black rubber. i dont have any of those...