I would suggest you unlatch the left and right rear latches, and unscrew the front screws, then raise the front a bit, and wiggle it a quarter inch or so side by side to see if it sticking to the paint at the rear.
If it moves just a little bit, then get another strong guy and both gently lift the top off and walk back off the back of the car and put the top on its stand. The stand should be already set up. It weighs about 80 pounds and you have to reach out, hence strong guys!
If it appears to be sticking, you could spray some
WD 40 along the seal from one side to the other on the outside to see if it will loosen anything that could be making the rubber seal stick.
My top has been on all winter, and I had the car fully repainted last fall, so I'm hoping the silicone spray that dried on the rubber seal will prevent any issues on my car too! The Urethane paint dried for 2 months before the top install but we will see what happens!