Replacing idler arm bushings on 55 Tbird with power steering | Ford Thunderbird forum club group 1955-2005 models

  • We're glad you found us via a search engine! Right now, you can join our club absolutely free and unlock member only features like the site search! This notice only appears once! It only takes 30 seconds to register, and we would love to have you as part of the World's largest Thunderbird Forum/Club! Click here to continue

Replacing idler arm bushings on 55 Tbird with power steering

  • Thread starter Thread starter Steve k
  • Start date Start date
S

Steve k

Bronze Member
Reaction score
2
Thunderbird Year
1955
Because there are no stops on the bushings or the idler arm bracket, or the steering arm, can anyone tell me how far to press the bushings thru the bracket and arm. The shop manual describes the use of a special tool, but no measurements. Steve k

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 
Steve k said:
Because there are no stops on the bushings or the idler arm bracket, or the steering arm, can anyone tell me how far to press the bushings thru the bracket and arm. The shop manual describes the use of a special tool, but no measurements. Steve k
Click to expand...
Steve k said:
Because there are no stops on the bushings or the idler arm bracket, or the steering arm, can anyone tell me how far to press the bushings thru the bracket and arm. The shop manual describes the use of a special tool, but no measurements. Steve k
Click to expand...
Should be able to do it with a bench vise. Make sure it's straight & lube it up with a lil grease and press it in with the vise. Both ends should have about the same sticking out the ends. if not press it back a lil until they are even. GOOD LUCK
 
You must log in or register to reply here.
Back
Top