New Owner - 1962 T-bird - What is the best heat/sound insulation, etc. | Ford Thunderbird forum club group 1955-2005 models

  • NOW LIVE! **LIFETIME MEMBERSHIPS** Guest! You can upgrade your account today and unlock member only features of the site and remove all Google/Amazon ads! Click here to learn more. Thanks for supporting the club!

  • We're glad you found us via a search engine! Right now, you can join our club absolutely free and unlock member only features like the site search! This notice only appears once! It only takes 30 seconds to register, and we would love to have you as part of the World's largest Thunderbird Forum/Club! Click here to continue

  • Order your Thunderbird 4th of July shirts today! Click here to read more!.

New Owner - 1962 T-bird - What is the best heat/sound insulation, etc.

  • Thread starter Thread starter Leon
  • Start date Start date
Leon

Leon

Click here to upgrade
Reaction score
1
Thunderbird Year
1962
First off, I just purchased my first ever thunderbird. I have owned several other classic cars/trucks in my past, but this is my first Thunderbird and I want to do it right when it comes to restoring her. She is already in decent original condition, but I want to make her better. So I was wondering if I could fire a couple of questions at you all.

-What is the best insulation you have found for heat/sound for the floor? While she has A/C, the heat coming from the floor is noticeable.

-What is the best oil to use? I have done a bit of research and Rotella 15/40W seems to be a favorite. The engine is stock.

30706736_973902512786991_6387369822379835392_n.jpg

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 
Welcome ! I purchased my 62 last year and had the same heat from floor issue. I replaced the heater core and now all is well.
 
I just installed Frost King 1/8" thick, 12" by 15' Foam pipe wrap on our '66. Heat wise it has an R value of 3. I only used a single layer but I'm considering going back and adding a second layer for a total of R6. I was worried about doing 2 layers but the new carpet with mass backing fit very well and should take a second layer without issue. I used a single layer on the passenger door and sound wise it's rather spectacular for $20. I haven't done the other door yet and the difference in sound when closing the door is astounding.

On my door, with clean metal, the Frost King's adhesive sticks very well. I used a roller when installing, it helps quite a bit. On the floor, it stuck to clean metal no problem. Anyplace that had old bits of carpet, insulation or sound deadening material adhesion was a problem. I used carpet adhesive and it stuck very well.

I expect to use 5 rolls of the Frost King stuff, should come in less than a $100. A second layer to the floor will probably add another $40 to the cost. Regardless, at $140 you're coming in at half the cost of the big name products and getting decent heat and sound control.

On another project I used a homemade version of Lizard Skin. I sprayed 2 coats of 1:1 ratio of urethane paint and ceramic spheres on the underside of the car. The interior got 2 coats of 1:1 latex paint and ceramic spheres; on top of that I will use Frost King pipe insulation.

As you can tell, I prefer the cheaper options. From all my research it appears that the cheap stuff get things done just as well as the expensive stuff.
 
Nice bird, I had a 61, These are big cars that ride smooth and handle like a boat !...Congrats on your purchase.
 
You must log in or register to reply here.
Back
Top