64 tbird gas filler pipe removal

[larry tbird]

I'm replacing the gas tank a nd wondering how to get the old filler pipe out. The service manual isn't to clear on this. Any help is great. Thanks, Larry.

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 

[Seabird]

Remove the four screws. Grab the pipe and twist and pull hard. It’s in there only with the o-ring. Firm, strong pull will get it out. Good luck.

 

[biddle]

Added the word "Removal" to your subject.

 

[Dj-Dan]

I'm replacing the gas tank a nd wondering how to get the old filler pipe out. The service manual isn't to clear on this. Any help is great. Thanks, Larry.

Larry, I would strongly suggest replacing that O-Ring after you twist and pull that filler pipe off. I replaced my gas tank and put that filler backing, not knowing from being so old and not as elastic it would fail. When I started filling my 64 T-bird all the way up with gas, the fumes and gas was running through that area of the filler pipe. The o-ring got twisted and wasn't doing it's job after 50 some years. Have a Super DAY!! Dan (Forest Hill, Md.)

 

[larry tbird]

To all, thanks for the help. I'm replacing the tank and will put in a new o ring in the tank. Thanks again, Larry.

 

[John saz]

Larry,
Check out youtuber jernone- https://www.youtube.com/user/joernone
66 Ford Thunderbird Repair and Refurbishment part 3, 4 and 11. He has a great set if videos. He knows what he is doing and is willing to share the information.