2004 Pacific Roadster-Upper Windshield Reveal Molding Chrome | Ford Thunderbird forum club group 1955-2005 models

  • We're glad you found us via a search engine! Right now, you can join our club absolutely free and unlock member only features like the site search! This notice only appears once! It only takes 30 seconds to register, and we would love to have you as part of the World's largest Thunderbird Forum/Club! Click here to continue

  • 2002-05 Owners. As of August 2022 there is now an entire suspension kit for sale! Scroll down to the bottom of the first post click here.

2004 Pacific Roadster-Upper Windshield Reveal Molding Chrome

  • Thread starter Thread starter 4PacificBird
  • Start date Start date
4PacificBird

4PacificBird

Bronze Member
Reaction score
20
Thunderbird Year
2004
2004 Pacific Roadster: I have a new Upper Windshield Reveal Molding Chrome piece to replace the original that is pealing. How do you get at it to replace it?

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 
The interior A-pillar moldings as well as the header moldings have to be removed. The interior A-pillar moldings pull out and back towards you. Use deep dish metric sockets to remove the nuts that are connected to studs that are affixed to the chrome exterior moldings, put a piece of tape in the socket to prevent the nut from falling out. beside the two nuts, there is a screw on the bottom of them outside. Once the nuts and screws are removed then the moldings pull off. You remove the side chrome moldings first and then the center piece. Pull the header molding dawn to get to the nuts on the center piece.
 
Last edited:
PCR59 said:
The interior A-pillar moldings as well as the header moldings have to be removed. The interior A-pillar moldings pull out and back towards you. Use deep dish metric sockets to remove the nuts that are connected to studs that are affixed to the chrome exterior moldings, put a piece of tape in the socket to prevent the nut from falling out. beside the two nuts, there is a screw on the bottom of them outside. Once the nuts and screws are removed then the moldings pull off. You remove the side chrome moldings first and then the center piece. Pull the header molding dawn to get to the nuts on the center piece.
Click to expand...

Thank You PCR59! Appreciate the info. Sounds very straight forth.
 
4PacificBird said:
Thank You PCR59! Appreciate the info. Sounds very straight forth.
Click to expand...
Help. My sister in law had Best Buy install a Serius radio and mic in her 2004. They broke two screw receptacles behind the upper trim pc and now nothing stays put. She is appealing to BB but a new pc is $350. So how do you remove the top trim pc with the lights in in? I will take mine down and see if I can figure a fix. My "repair manual" thumbdrive will not open anymore. Is the cd version any good? Thanks for the help.
 
You must log in or register to reply here.
Back
Top