2002 Echo in radio

[maccam]

Radio was working fine then all of a sudden I am getting an echo on all channels. How do I fix this?

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 

[biddle]

Radio was working fine then all of a sudden I am getting an echo on all channels. How do I fix this?

Can you post a short video clip that has the audio echo? You may need to upload to Youtube and then copy/paste the video link.

Are you using anything like a Bluetooth adapter etc? Do you have a hearing aid? haha JK.

 

[maccam]

Am not using a BlueTooth adapter and do not have a hearing aid 😄 Radio is all original.
It may take a while to get a video clip

 

[biddle]

It may take a while to get a video clip

use the Youtube App to create a video and then share the link to the video.

 

[57 bluebird]

Press the DSP control to access theDSP menu. Press the SEL control to enter one of the following modes:• DSP OFF• SIGNAL MODE• OCCUPANCY MODE Use the SEL control to select the desired signal mode (the selected mode will appear in the display).The following signal modes can be selected:• DSP OFF—disengages the feature• NEWS—”voice-only” type of sound with a limited audio band• JAZZ CLUB—jazz club with clearly reflected sounds• HALL—rectangular concert hall capacity of about 2 000• CHURCH—church with a high vault• STADIUM—outdoor stadium with a capacity of about 30 000 Press the DSP control again to access the occupancy modes. Use the SEL control to optimize the sound based upon the occupants in the vehicle. The following occupancy modes can be selected:• ALL SEATS• DRIVER SEAT• TOP DOWN Mute mode Press the control to mu