1993 t bird 5.0 belt length | Ford Thunderbird forum club group 1955-2005 models

  • We're glad you found us via a search engine! Right now, you can join our club absolutely free and unlock member only features like the site search! This notice only appears once! It only takes 30 seconds to register, and we would love to have you as part of the World's largest Thunderbird Forum/Club! Click here to continue

1993 t bird 5.0 belt length

  • Thread starter Thread starter Bigalsbird
  • Start date Start date
Bigalsbird

Bigalsbird

Click here to upgrade
Reaction score
1
Thunderbird Year
1993
Morning my alternator bite the dust which was kinda good
As
The guy who put
My engine in had the belt on wrong my car is 93 lx 5.0 ac ps and we removed the smog pump what length belt do i need please

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 
I guess you could measure it. I believe that car has a spring loaded belt tensioner which will give you some latitude so you don't have to get the belt length exactly correct. You could have someone hold the tensioner about midway through it's travel, then thread a piece of cord around the pulleys where the belt will have to go and measure that length.
 
64ZCODE said:
I guess you could measure it. I believe that car has a spring loaded belt tensioner which will give you some latitude so you don't have to get the belt length exactly correct. You could have someone hold the tensioner about midway through it's travel, then thread a piece of cord around the pulleys where the belt will have to go and measure that length.
Click to expand...
When I removed the smog pump it will
Not run the way ford wants to as
It wont even touch the tensioner my builder is thinking of a way to
Clock
The tenshioner a diff way and when we
Get it figured out i will update everyone thanks
 
Bigalsbird said:
When I removed the smog pump it will
Not run the way ford wants to as
It wont even touch the tensioner my builder is thinking of a way to
Clock
The tenshioner a diff way and when we
Get it figured out i will update everyone thanks
Click to expand...
One additional thought then, you could consider buying a new serpentine belt setup. There are some nice billet installs that could be quite tasty. Good luck!
 
You must log in or register to reply here.
Back
Top