K
Kay Bird
Click here to upgrade
- Last seen
- Joined
- Mar 30, 2021
- Thunderbird Year
- 1966
I have a 66 Hard Top Landau with a 428. It’s ran before but just before it stopped running I switched out the distributer cap and bug, as well as the coil. Once they were installed correctly they car proceeded to spin over but not catch spark and run. (The problem) The coil will in fact get spark to it, meaning there is power going into it, but it doesn’t come out the center wire. I’ve tried 3 different coils including the old one because I thought the new one was fault but it still doesn’t start. I’ve tried replacing the voltage regulator and a couple other things. Is it a poor ground? Is it a split wire? Or am I just unlucky enough to have 3 dead, brand new coils? If you have any help on why the car will give power to the coil but won’t give it out into the distributer please inform me. Again, power to the coil, and with a test light it doesn’t come out and will not start.
Thanks for any help, Kay
Thanks for any help, Kay
Last edited by a moderator: