valhalla 4771
- Reaction score
- 5
- Thunderbird Year
- 1957
I bought a new dimmer switch and cover and the cover doesn't seat flush on the firewall. The problem seems to be the bracket holding the emergency brake cable. This bracket seems to be properly attached to the firewall. But when I put the coverplate with the bottom 2 screws there is a good 1/2 " gap at the top. If I put some longer fasteners in the top 2 holes I can screw it down close to the firewall but there is still a gap. And I'm not sure if I'm creating problems for the dimmer switch and/or the brake cable. Any suggestions would be appreciated.
This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.
