1955 Thunderbird Frame Measurments

[50th]

Does anyone have a chart of measurements along with a diagram of the frame/Chassis on a 55 bird?
Need to make sure my frame straight before i get it powder coated
Thanks in advance
Wayne

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 

[Douglemmo]

I believe I have seen frame dimensions in the back of the Ford Shop Manual

 

[doug7740]

Does anyone have a chart of measurements along with a diagram of the frame/Chassis on a 55 bird?
Need to make sure my frame straight before i get it powder coated
Thanks in advance
Wayne

Wayne,

Attached is how you check the frame alignment on a 1955 Thunderbird.

doug7740
1955 Thunderbird Blue

 

[50th]

Thanks doug
I assume that there isn't a chart of factory specs only the actual measurement of the existing frame
Just make sure it is square and within the 3/16 tolerance
Thanks Again

 

[doug7740]

Wayne,

In issue number 10 of CASCO’s ThunderEnlightening newsletter, there are frame specifications for a 1957 Thunderbird frame. Since CASCO was asking if anyone had similar specifications for the 1955 and 1956 Thunderbird frames, I can’t be sure if the attached 1957 Thunderbird frame specification would be of any help. If you measure your frame and the specifications are the same, let me know.

doug7740
1955 Thunderbird Blue

 

[1957tbird]

Appreciate this - super helpful!