Thanks much for the reply. When I held mine in place I assumed it was supposed to cover the gap between the grill face and the nose of the car, like the lower piece of the grille. But the more I investigate, it appears there is a gap from the bottom side of the upper grille moulding to the grille face. Is that assumption correct? I'll try to fit it that way this evening. I see there are weird little clips that hold the upper piece to the nose. (I don't have those at this time). Does orientation of those matter or is it self evident when I get the pieces fastened to the nose. The moulding wasn't on the car when I purchased it however, a new piece was in the trunk. So im feeling my way through that step.