- Reaction score
- 66
- Thunderbird Year
- 2004
I will not mention the amount of time I have been try to remove the rear bumper of my 2004 Retro Tbird. I would like to see if anyone knows the final solution for taking it off. Yes, lots of info on front bumper removal and so far, zip on rear.
What I have done so far:
1. Unfastened screws holding bumper and panel on each side.
2. Removed two bolts under bumper.
3. FINALLY found correct tool to take those 6 @$%$!!l long screws off. By the way, the correct dimension for that nut is 7/16 standard. Not 10 or 12 metric.
4. Now, do I need to remove the taillights?
I did read something about releasing tabs or clasps. However, I am VERY cautious about putting a soft tool to separate bumper from frame.
I've included some pictures. THANK for any help!







What I have done so far:
1. Unfastened screws holding bumper and panel on each side.
2. Removed two bolts under bumper.
3. FINALLY found correct tool to take those 6 @$%$!!l long screws off. By the way, the correct dimension for that nut is 7/16 standard. Not 10 or 12 metric.
4. Now, do I need to remove the taillights?
I did read something about releasing tabs or clasps. However, I am VERY cautious about putting a soft tool to separate bumper from frame.
I've included some pictures. THANK for any help!







This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.
Last edited by a moderator:
