2002-2003-2004-2005 Ford Thunderbird EGR Valve Vacuum Modulator F63Z9J459AA

[biddle]

2002-2003-2004-2005 Ford Thunderbird EGR Valve Vacuum Modulator F63Z9J459AA

Buy on Amazon- https://amzn.to/2KqC3TE

Buy on EBay- Click here



Also see- Ford Thunderbird EGR Valve Motorcraft CX2059

2002-2003-2004-2005 Ford Thunderbird Lincoln LS EGR Valve Motorcraft CX2059

EGR Motorcraft CX2059 2002 Only replaces part # XW4E9D475B2A Purchase on Ebay- https://ebay.us/vZQgca Purchase on Amazon- https://amzn.to/3PYZC3Y 2003-2005 Purchase on Ebay- https://www.ebay.com/sch/?kw=EGR+Valve+Motorcraft+CX2059&campid=5338236430 Purchase on Amazon- https://amzn.to/3gLJpz7

forums.fordthunderbirdforum.com

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 

[biddle]

Standard Motor Products CP673 Canister Purge Valve-

https://amzn.to/2KKVINT

 

[Texas Hot Rod]

HELP!! 2002 Thunderbird. The Canister Purge Valve for this car is no longer available. Standard Part CP671, Ford Part XW4Z9C015AB. The Ford version is obsolete as well. I can't even find a used one. Has anyone had any luck with a new purge valve from a different model? I've been looking at the CP677 that looks similar, but I hate to buy it if it won't work? It fits other Fords from the same era. Thanks.

 

[biddle]

Folks- Stop posting parts wanted or for sale in the general forums. It's common sense they go in the parts wanted/for sale area of the forums! Post moved.

The part you need is here- https://www.amazon.com/dp/B004J9A89Q/?tag=thunderbirdforum-20

 

[Bobwheeler]

This is a 2002 to 2005 Tbird? Correct?

 

[Bobwheeler]

Before you replace that solenoid valve, read this. I need to own a 1998 Pathfinder that threw the code for the same problem. YouTube to the rescue and I suggest you look there.

Here's what was going on. The Evap Canister holds a brick of activated charcoal which over time begins to disintegrate in the form of small particles. A hose leads from it to the solenoid valve. When the engine is running, the solenoid opens and manifold vacuum sucks on the cannister and the particles. Eventually the particles clog the hose and solenoid valve and it all stops working and throws a code. A new brick was $500.00 and sets you up for the same problem down the line.

The answer? Per YouTube, disconnect the hose between and blow clear with air. Took wife and I 12 or more back and forths before before it cleared. Replace the solenoid now AND, re-plumb the cannister outlet with fuel hose and install a clear fuel filter as close to the cannister as you can using hose clamps.

The filter stops all particles and requires emptying every now and then.

I did it all and it worked well for 7 years. What do you think?

 

[doug7740]

The cause of the problem with your canister purge valve is the evaporative canister itself. You have to correct the cause before you replace the canister purge valve. One of the most common charcoal canister problems is caused by “topping off” your gas tank, which can cause an overflow of fuel to flood the canister. Bobwheeler gave a good explanation why your canister purge valve is mechanically failing, but I would replace the evaporative canister instead of installing a filter to trap the loose particles that I have to change every now and then.

Evaporative canisters are not that expensive. Here are two canisters parts:

MOTORCRAFT CX1671 {F6DX9D653BA, F6DZ9D653BA} Dual Canister Assembly

STANDARD MOTOR PRODUCTS (CP3070 Alternate/OEM Part Numbers}



I'm sure that you can find cheaper ones, but remember you get what you pay for.

doug7740
1955 Thunderbird Blue