1991 Turn Signals Work Intermittently

[BigxN8]

I'm having problems with my turn signals. They will sometimes work and they sometimes won't. The lights do work, but they just stop. The hazard switch works fine. Is there a fuse or wire, or am I going to have to replace the multifunction switch? And if so, how will I go about getting to it?

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 

[RSConnor]

I'm having problems with my turn signals. They will sometimes work and they sometimes won't. The lights do work, but they just stop. The hazard switch works fine. Is there a fuse or wire, or am I going to have to replace the multifunction switch? And if so, how will I go about getting to it?

Now I’m in the same boat. Did no one reply? Where is this switch to be found?

 

[mcm51]

My turn signals was doing the same thing several years back on my '95, would work sometimes, everything else worked fine. I fixed the issue swapping out the what I'll call the signal switch, a small square black box located just under the lower panel on the left side of the steering sitting in the driver's seat, ya have to take off the lowest panel under the steering column, then it's in your face on the left side.......When it comes to the multi-funtion switch, it's been to long ago that I swapped mine out, but IIRC, I think it's just a matter of removing one or both plastic steering column covers and once again, it's in your face, it was a pretty easy job, that I do remember....