J
jj_sharp
Click here to upgrade
- Last seen
- Joined
- Aug 12, 2019
- Thunderbird Year
- 1
Two electric window motor screws fell off from the window regulator, and there is at least one stripped screw.
What it my best bet for fixing this?
Not being a proper mechanic, this leaves me scratching my head.
If possible, I would prefer not to purchase parts.
1. Drill it out, and use a nut & bolt (not sure this can work).
2. Tap to the next size (not sure this can work).
3. Some sort of JB Weld solution (maybe fill & re-tap)?
4. <other>
Thanks for any advice that you may have.
I am going to study it some more now, will check later for any advice...Thank!
My wife has put maybe 200 miles on the car, I expect much of this kind of thing going forward.
Jody
What it my best bet for fixing this?
Not being a proper mechanic, this leaves me scratching my head.
If possible, I would prefer not to purchase parts.
1. Drill it out, and use a nut & bolt (not sure this can work).
2. Tap to the next size (not sure this can work).
3. Some sort of JB Weld solution (maybe fill & re-tap)?
4. <other>
Thanks for any advice that you may have.
I am going to study it some more now, will check later for any advice...Thank!
My wife has put maybe 200 miles on the car, I expect much of this kind of thing going forward.
Jody