1956 spark plug hanger kit | Ford Thunderbird forum club group 1955-2005 models

  • NOW LIVE! **LIFETIME MEMBERSHIPS** Guest! You can upgrade your account today and unlock member only features of the site and remove all Google/Amazon ads! Click here to learn more. Thanks for supporting the club!

  • We're glad you found us via a search engine! Right now, you can join our club absolutely free and unlock member only features like the site search! This notice only appears once! It only takes 30 seconds to register, and we would love to have you as part of the World's largest Thunderbird Forum/Club! Click here to continue

1956 spark plug hanger kit

  • Thread starter Thread starter billambro
  • Start date Start date
B

billambro

Bronze Member
Reaction score
1
Thunderbird Year
1956
Does anyone have pics or a diagram on how/where to mount my spark plug wire hanger kit so my wires don't rest on the exghaust manifold?
Much appreciated!

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 
Hope this helps
pic58.jpg
 
Last edited by a moderator:
Attached is the ignition wire instruction sheet I received from CASCO when I purchased new ignition wires. I think these instructions will be helpful, because there are pictures of the areas you are having difficulty with.
Spark Plug Wire Installation_1.jpgSpark Plug Wire Installation_2.jpg
Spark Plug Wire Installation_3.jpg

doug7740
1955 Thunderbird Blue
 
Last edited by a moderator:
It is nice that you want to do this, but you can save yourself a lot of headache and have Casco do this for you. They will route all wires in your grommets so that all you need to do is to remove the bolts, remove the wires from the plugs and remove the distributor cap. Then you put their assembled plug wire set which includes all the grommets and hangers attached along with the distributor cap with all the wires except the coil wire attached. I would never do this myself as long as I can have them solve the problem for us.
 
CASCO does offer a service for $24.00 to assemble the wires, and you also have to purchase the spark plug wire installation kit for $41.00. If you want them to install the wires in the distributor cap, you have to purchase the distributor cap for $26.25.

Since my distributor cap was new and the grommets and hangers were in good condition, I decided to assemble the wires myself. Besides, half the fun of owning a classic car is doing the work yourself.

doug7740
1955 Thunderbird Blue

Labor Charge.jpg
 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top