jimntempe
- Reaction score
- 88
- Thunderbird Year
- 1957
Another possibility would be it's a shunt on the pressure side. If so there should be two T's added to the system. One T in the high pressure line coming out of the pump and one T in the return line going back into the reservoir. That would be how I would have done it to avoid pressurizing the pump with a blocking valve in the high pressure side. It would change the system so that the Stuff below sort of floats along with the linage without providing any assist whenever the shunt valve was turned on.
This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.