1957 Steering head turn signal assembly removal | Ford Thunderbird club group 1955-2005 T-Bird models

  • We're glad you found us via a search engine! Right now, you can join our club absolutely free and unlock member only features like the site search! This notice only appears once! It only takes 30 seconds to register, and we would love to have you as part of the World's largest Thunderbird Forum/Club! Click here to continue

1957 Steering head turn signal assembly removal

  • Thread starter Thread starter RHahn57
  • Start date Start date
R

RHahn57

Click here to upgrade
Reaction score
4
Thunderbird Year
1957
Hello All,
Disassembling the steering head, shaft, etc. Scratching my head though on the turn signal switch removal. Is there a hidden set screw I just don't see?

column.jpg

This page contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

 
RHahn57 said:
Hello All,
Disassembling the steering head, shaft, etc. Scratching my head though on the turn signal switch removal. Is there a hidden set screw I just don't see?
Click to expand...

❏ 1. Remove the clip and spring on the turn signal stud and remove the turn signal mechanism from the center of the steering column tube flange (p/n 3511).
❏ 2. Remove the two turn signal switch screws then remove the 3 screws holding the steering column shield (p/n 3669) to the flange (p/n 3511).
 
IMG_4069.jpeg

The spring and clip were not an issue but the mechanism does not want to lift vertically off the turnsignal shaft. Corrosion down in there I suppose so will try and get some lube down in there over night.
 
You must log in or register to reply here.
Back
Top