1957 rear axle seals

1957Bird

1957Bird

Active Member
Bronze Member
Last seen
Joined
Nov 26, 2019
Thunderbird Year
1957
Getting ready to pull rear axles on my 1957 Bird to replace seals. Seems like a pretty straight forward project. Any comments or suggestions from anyone who’s done this would be appreciated.
thanks
Roger
 
Last edited by a moderator:

This site contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.

Changing the outer axle seals is an easy job. Before reinstalling the axle, polish the sealing surface with emery cloth and always install the seal in the axle tube with the open lip towards the inside.

doug7740
1955 Thunderbird Blue
 

Attachments

  • Rear Axle Seal Surface Before Polishing.jpg
    Rear Axle Seal Surface Before Polishing.jpg
    1.5 MB · Views: 8
Need a slide hammer or any sort of special puller to get the axel out after fasteners are removed??
Tks
 
I used a slide hammer. I may be wrong, but don't think you will be able to remove it any other way.

doug7740
1955 Thunderbird Blue
 
You must log in or register to reply here.
Back
Top