x frame

[bayfeet]

does anyone know what size hex socket is used to tighten the bolts underneath the car

 

[Quickdraw]

does anyone know what size hex socket is used to tighten the bolts underneath the car

bayfeet,


Or do a search on the words: cross brace

AutoZone and probably most other big auto stores will loan you a torque wrench and other tools for free.
.
.

 

[bayfeet]

Hi George and thanks for the information. I had rented a torque wrench from auto zone and the put it on the bolts, they turned but the wrench did not release. I had it torqued to 46lbs. The bolts started to strip so I stopped and did not want to do too much damage. I went back to auto zone and they gave me a different wrench, I'm hesitant to try again because I don't want to strip the bolts. They appear to be 1/2 in size and there are twelve of them. Thanks for the info on the threads. Ed

 

[bayfeet]

xframe

Went back to auto zone and they gave me another torque wrench, this one worked and car is considerabley tighter, I have the two in front to do but have to remove the cover. The info on wheel balancing looks good too. Thanks again- Ed

 

[George]

bayfeet, glad the info on bolts and wheels helped!

Quickdraw, thanks for bringing that thread forward. I had forgotten it was posted

 

[bayfeet]

xframe

Quickdraw, and George thanks for your help too. All this informaton is invaluable! This particular fix makes all the difference in the world. Ed