C
- Last seen
- Joined
- Mar 21, 2020
- Thunderbird Year
- 1997
Has anyone else ever run into this problem…. While disassembling my 4.6L in my .97 thunderbird; I’m having difficulty separating the exhaust pipes from the exhaust header after removing the retaining nuts at the exhaust flange.. I have discovered that the engine does not sit square in the engine bay; it sits a half bubble low to the drivers side as well as the front is sitting a few degrees to the passenger side as opposed to the bell housing … all head bolts have been removed as well….
Thanks in advance for suggestions…
Thanks in advance for suggestions…