- Last seen
- Joined
- Mar 2, 2020
- Thunderbird Year
- 1955
I cannot locate a notch on the crank pulley to determine TDC. There is a pointer, but no degree gauge. Do I need to get #1 to TDC and mark the pully?
How can you tell 6° BTDC without a timing gauge on the engine/pulley? I just have an old SUN timing light without an advance meter.
Is there a special procedure for timing besides disconnecting the vacuum line from the carb to the distributor?
Thanks
Bob
How can you tell 6° BTDC without a timing gauge on the engine/pulley? I just have an old SUN timing light without an advance meter.
Is there a special procedure for timing besides disconnecting the vacuum line from the carb to the distributor?
Thanks
Bob