W
worcboston
Click here to upgrade
- Last seen
- Joined
- Jun 30, 2020
- Thunderbird Year
- 2005
Lost wrench for 2005 hardtop removal. What size wrench would that be.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Please
sign in or
join the Thunderbird
club free to access the search page and many other free site features.
If you forgot your password
click here
This site contains affiliate links for which I may be compensated. As an eBay Partner, and Amazon Associate I may be compensated if you make a purchase at no cost to you.
OEM‐ https://www.ebay.com/sch/i.html?LH_...teid=0&campid=5338236430&toolid=20008&mkevt=1Thank you but I was looking for the original Thunderbird wrench that came with the car.
You might not have noticed that the bolt was already in there cause it deep into a socket and isn't readily visible. The head of the bolt is very recessed in the hole and if you don't put the Torx bit in perfectly vertical, it won't engage. You might have to purchase a took with a long shaft cause the hole diameter probably will only accept a 1/4" drive. Torx screw drivers, which are readily available might not give you the grip to tighten the screws enough or once tightened to remove them comes summer. So if you go our to buy a #40Torx look for one that has a handle at 90 degrees to the shaft as this will give you the leverage you might need to screw them in and out.They should be already there recessed in the bolt holes. If you dont have the tool, use a #40 torx bit inserted from the bottom.
If you look on page 53 of your owner's manual you will see that the two screws are pushed down into the windscreen panel.I need the bolts that secure the front of hardtop to window frame