1997 Front Wheel Spind6e Bolt at Suspension Arm

[keith20mm]

I am replacing the upper Front Suspension Arm on my 1997 TBird. The manual states to discard the old bolt N806579-S150, which is the bolt that closes the Front Wheel Spindle (3105) onto the Front Suspension Arm Bushing Joint (3085).

In simple terms, the bolt clamps the spindle upper end onto the ball joint stud.

Anyone know where to obtain new, correct, bolts, as Ford no longer has them available... imagine that.

TIA

 

[Curt]

I replaced every part on my 97 I used the original bolts, since they were in perfect condition. The "CHILTON" says to replace all bolts, but if originals are good, dont worry about it.